Viking Dress in Jersey

As the Hobbit and LOTR are largely inspired by Nordic legends, I thought I’d put a Viking dress into my final collection. It’s pretty much zero-waste too.

viking-dress-pattern

 

I recently got an overlocker on eBay (Toyota SLR4D) and finally have it working properly! And learning to work with jersey is one of my goals for my FMP, so I’m making this dress from either jersey or ponte knit (which I have to test sew because I haven’t used it before and it’s different).

This dress took me about 4 hours to make including cutting. I’m reasonably pleased with it and I will be wearing it, even though it’s a size 10 and I’m a 6.

Now, you may have noticed that the sleeves are a little snug in comparison to the dress form. This is one of the reasons we toile. 🙂 I have made them bigger on the pattern.

The pockets were going to be sleeve segments, but I thought pockets would be better (because who doesn’t love pockets?!)

New skills used in this dress: ribbing, overlock seams, overstitching, using clear elastic as a stabiliser on knits, and marking jersey (use a marker pen). I haven’t perfected the neckline though (and it bothers me).

I got the fabric yesterday at The Shuttle in Leeds. I went on a fabric sourcing trip with the class, which was fruitful, though I still have a few more things to get, like sweatshirting and gold-coloured denim. I estimated my final collection will cost up to £300 in supplies. Not bad really, considering in London it’s not unusual to pay £7,000 (but that includes paying people to make it for you, which we don’t because we learn technical skills 😛 ).

I have updated the pattern to work with the changes in the sleeves, and will try it next in a t-shirt, perhaps with the lace at the shoulders too. 🙂

 

If you’d like more timely updates, don’t forget to check out my Instagram!

 

Twisted Seams in Jeans

I know I haven’t mentioned it on here yet, but I’m onto my final collection of my BA (Hons) Fashion Design & Production at York College. It’s called The Shire and is based largely on The Hobbit and LOTR (follow my Instagram for better updates). I’ve more or less got my final designs and two of the garments are jeans (oh yeah, I now work at Levi’s in York City Centre as a stylist and tailor). There will be a pair of Mom Jeans and a pair of skinny jeans. First I’m working with the Mom Jeans.

At Levi’s we have some jeans like this. They’re a slim, relaxed fit in the leg, with a good fit in the bottom, and a fairly straight waist. The latter is something I will not be incorporating because I like my jeans to stay up without a belt, but the legs are good and I want to use that look. So I compared the cut with those from Metric Pattern Cutting for Womenswear and found that they are wildly different, but both look good. The latter didn’t look Mom-jeanish though when I toiled them.

This is what the Metric Pattern Cutting Jeans look like if you widen the legs to  make them Mom-jeanish
This is what the Metric Pattern Cutting Jeans look like if you widen the legs to make them Mom-jeanish

 

This is the shape of Levi's jeans like the 501s, Wedgie-fit, and 501CT (from memory)
This is the shape of Levi’s jeans like the 501s, Wedgie-fit, and 501CT (from memory)

Now, bear in mind that the first ones are size 12, and the latter ones are my size (approximately 8) so mine are narrower. The legs on the Levi’s jeans are much straighter at the outseam than the Metric Pattern Cutting ones. The alignment is also a lot closer to the side seam; you could very nearly make selvedge jeans with that pattern!

So I printed it out in my size and toiled it. All going to plan, but I made the pattern too long and shortened it on paper. This is where things began to go awry. When truing the side seam I forgot to take account of the yoke on the back, so the front pattern ended up 3cm too short, and of course I didn’t realise at the time.

I noticed something was wrong when I was sewing the inseam and the back was not only not shorter than the front (it should be) but it was too long by a fair bit. I just cut it off the crutch with the overlocker (bad move). Now the inseams matched. So I sewed the side seams, and realised that it wasn’t just the inseams that wouldn’t have matched. I carried on sewing and tried the toile on afterwards.

Now, the first problem was the bum-nose. I do not wish to appear as if I have a tail tucked in there. I assumed that this was probably due to the issue with the crutch seam, so I moved on.

Another issue came to my attention when I looked down. The legs had twisted symmetrically. I could not fathom why. Levi’s jeans didn’t. And my toile wasn’t even in twill so that couldn’t be it. Surely it must be the fit?

I cut up one leg and examined the new shape. It was… odd.

Front leg of toile

 

Rear leg of toile

Now, I assumed, based on half-remembered facts about twisted seams, that I must adjust the pattern to make the jeans hang right when I wear them. So I spent a good few hours playing with the pattern on Illustrator, in vain, because I couldn’t get the seams to be corresponding measurements. After said good few hours it occurred to me to get the toile out and examine it again. I thought, What would happen if I lay the legs as they would have, had they been the same length to begin with and I hadn’t chopped that bit off?

And this is what happened…

twisting-legs

The back leg’s inseam was 3cm lower than the from leg, but sewn to match it, so the grainlines were not level. This meant the leg was trying to level itself out. As it couldn’t do that magically, it twisted round like a spiral staircase. It sort of makes sense and evidently is what happened, as you can see in the above photo. Accidental Pattern Magic. As proof, if I lay the front leg properly across (as it should have been) all it well. I wore it pinned for a while correctly and it didn’t twist. I didn’t take any pictures of this (but I’m going to retoile to eliminate this issue and check the fit otherwise).

So there we have it: the (or a) cause of twisted legs in jeans is when either the front or the back isn’t level (maybe because the seamstress/seamster stretched one of them and cut it off to match). I think this happens more if the problem extends below the knee.

I’m glad I learned that little tidbit, especially as I want to be a Master Tailor at Levi’s. 🙂

A poem about me-made jeans.

I’m currently working on a pattern for shorts for some of the designs in my first women’s wear collection of sewing pattern. I’m using the jeans block and started investigating the monobutt again (I want to be quite sure my pattern does not have that fitting issue, even if some people think jeans are supposed to have it). I came across this poem I wrote as part a response to this post ages ago. I thought you might get a smile out of it so I’ve copied it to here.

No more jeans that bind and twist,
Or other problems on the list.

I’ll make my own just as a like,
And Calvin Klein can take a hike.

Saggy legs will disappear,
Muffin-tops belong not here.

A contoured waistband I prefer,
I’ll draft my own, not be deterred.

My jeans will not drag on the floor,
My hems will rag and fray no more.

The pocket lining will be sweet,
As will the stitching on pockets-seat.

The monobutt has no place here,
I’ll have some jeans to suit my rear.

No skinny jeans that look like tights,
I’ll make my own and fit them right.

When I sit down, I’ll show no more,
Than could be seen when I stood before.

No sweat-shop labour in my clothes,
At ready-to-wear I’ll turn up my nose.

Custom-made, by me no less,
My me-made jeans will be my best.

Sabrina